Never underestimate the power of stupidity

You have to admire the sheer persistence that comes with the blissful ignorance of one's own limitless stupidity. Having been categorically steam rollered by the damning evidence against him, Keith Collins/Rassilon1 is totally unfazed by being shown to be the lying thieving scrote he is and continues to persevere in his goal of producing a sonic screwdriver. I am actually highly amused by this even though in a strange way it is not a million miles away from watching a slow motion car crash.

Remember, this is an individual who:

• Has  previously been asked by another respected RPF member, 'RogueScout', to refrain from copying his work
• Has not issued a single credible rebuttal of any of the allegations made against him
• Has subsequently changed his blueprints inexplicably and suddenly when my claims were made against him hoping that no-one would notice.

Like some kind of drunken fool, he continues to make an utter tit of himself, deluding himself in his peculiarly mangled brand of pidgin english, that he is in possession of more than a couple of brain cells. Here is his latest piece of incomprehensible buffoonery and I have to say, this is brilliant. I really don't need to attack this guy since he does such a fine job of self-sabotage it is bordering on comic self harm. (My responses in RED)

"Phez, when machining or drilling acrylics, one needs to think about drill point geometry on various materials, and the fact that, acrylics have a very low melting point. 

Starts off well. "Drill point geometry" is a suitably impressive piece of meaningless jargon that combines with a nice stating-the-obvious factoid about acrylics. 

Now I will keep this very simple, Bull Dog can understand it, he then can go and do a decent job on that mess he made of his acrylics shafts, you would think that been a so called “ENGINEER” you would know this, oh well he must of missed that part in getting his Chinaman’s engineering degree, more than likely getting a Chinese lobotomy that day, as that would explain a very grate deal.

If you want me to understand anything, try writing in English. I don't know what you're translating from but fucking hell, it is disgraceful. I would suggest you learn basic English before you graduate onto anything as challenging as engineering. If that's too hard for you still, try learning how to walk and chew gum at the same time. And it's 'great' NOT 'grate' you fucking simpleton. The only thing that grates is your butchery of English.

So here is what he would have learned, if you had actually attended an engineering university.

My engineering credentials are impeccable. I attended City University of Hong Kong and I have a post graduate degree from Imperial College. My work has been deemed good enough for my national space program as well as next generation mag lev mass transit systems. I am intelligent, witty, erudite and articulate. You...you're a boorish, uneducated thieving yobbo with the intelligence of a turnip, an unhealthy interest in scatology and I wager you probably smell like a dungheap too.

To drill acrylics you need to have a drill point angle of 118 Degrease, with a lathe speed of between 100 and 130 and no more, as any faster and you will prejudice to much drill tip friction heat, and it is no longer cutting at the cutting edge, but melting the acrylic. So, slow speed with the correct drill point angle.

What the fuck has prejudice got to do with drilling?! 

And the second an very much 80% to getting a clean and clear drilled hole in acrylic, is the use of an oil with a viscosity of water, this must be constantly added to the drill cutting surface at the same point as you are removing the acrylic sworf from the drill flutes.

Don’t let the drill flutes fill up with acrylic sworf as this will lead to the acrylic sworf getting jammed in the flutes of the drill and will lead to heat & heat will intern melt the acrylic and you will get fine cracks on the drilled hole surface, heat is the enemy in any machining work.

Johnny5676

Yep have plenty more photos of the Rassilon1 custom Tennant sonic kit, to educate bull dog, on how to engineer a Rassilon1 Custom Tennant Sonic. 

Er right....you're going to teach me how to engineer my own sonic? Go ahead, I could do with the laugh. I mean seriously, this is going to be very educational.

All the aluminium parts have been sent for hard anodizing, yep that’s rite, and all the aluminium parts will be clear hard anodized, why would I incorporate into my Rassilon1 custom Tennant sonic build kit, clear hard anodized parts. 

Whatever you say chump. And it's 'right' not 'rite' you fool. 

This is so you the builder or the assembler of the Rassilon1 custom Tennant sonic kit, will have nice clean sonic build kit parts that won’t form Aluminium oxide on the surface due to constant daily use.

Obviously you've never heard of Alclad. Fucking amateur...

This will be covered latter in my Rassilon1 custom Tennant sonic build kit thread."

To recap, this fuckwit. This dozy, thick-as-pigshit, doughnut, has questioned my ability yet he stole my engineering and my ideas and observations for his build. He has now figured he will attempt to get one over on me by drilling a channel into his perspex rod cleanly. Note the immense pride he feels over what he feels is a major victory against me. Note the self satisfaction, the deluded self aggrandizement evident in his rambling and condescending 'drilling acrylic 101' lecture he has given to Phez Petter. However, this is short lived as Jedibugs immediately take the wind out of his sails in the following  post:

"Not only is this statement rife with offensive language that is at best culturally insensitive and possibly racist, but it's also totally inaccurate insofar as the info on the Acrylic shafts. 

The shafts are not botch jobs, they are intentionally cloudy. They were actually changed from perfectly clear to cloudy in order to be screen accurate. Here is a photo posted here to the RPF by Neill Gorton, of him holding a screen-used Season 3-4 Sonic Screwdriver. Notice anything about the channel in the acrylic rod?

If anything, he didn't drill his cloudy enough... I can still see the wires in mine!"

This is akin to a guy boasting about how observant he is and suddenly turning around and knocking himself out cold by walking into a lamp post. We all knew Collins was a cock but this just defies belief in the stupidity stakes and has brought his credibility (which was already hovering around zero) plummeting into the southern reaches of the negative number scale. It also puts the final nail in Dan Stokes contention that this is a guy who has enough observational prowess to spot the details in the prop that I did. If he can't even spot a detail as basic as this then the rest of his rather gaseous denials of plagiarising my work seem rather pathetic, don't they?

As for his engineering skill or lack thereof, I want you all to take a look at Cuntus McCollins' (hastily) revised emitter head. (It's 'emitter' NOT 'transmitter' you fucking moron). For someone who professes to be skilled or trained in engineering, it is has a decidedly fatal flaw. Can anyone see what it is yet? I saw it immediately as did Jedibugs.

I must admit, having a pop at this guy does seem like shooting fish in a barrel. He has evidently got some serious learning difficulties which does make him a very easy target. However, the man is not helping himself by continuing to steal, lie and put one over on me when it is apparent he is outclassed in every way. I must confess to a certain degree of morbid curiousity about his continued need to try and put one on me yet succeeding only in smacking himself full tilt around the head and falling face first into the shit.