and again....

Again from Dan Stokes: (my responses in RED)

Once again I am using this space to respond to CT's attacks on me which have resulted from this thread.

I never claimed that "the Aztec heads were salvaged for both of them" (them being the two season 4 sonics) I claimed that the Aztec head was used on one of the props, the one MFX researched and the one David Tennant now owns. Please read more carefully. Indeed you did, and I have noted that and everything I stated subsequently took this into account. Sloppy writing in my part but you're splitting hairs as it doesn't make the slightest difference to my argument. I know you said only one Aztec head was used. 

You claim "I possess the Aztec head CAD files and what you see in my Mk1 S3-4 sonic IS the Aztec head."

I have seen absolutely no evidence to support this claim. Your eyes should have alerted you. Other proof...well, I've actually sent that to people I actually do like, so believe what you will, I've actually hinted at this in my blog over a course of the past three years just as I have with the paint. If you're too thick to see it, not my fault. I blame your parentage.

And you have always asserted, up until now, that that your mk1 Tennant sonic was extrapolated from the sonic you said you had examined--the season 1 Eccleston slider prop. Indeed I have and that still remains true but ask yourself, why I have done certain thing the way I have? Why have I added in details that I have? Just because i don't share them publicly does not mean I don't share. Read between the lines, you fuckwit. There is a lot of stuff going on here that you haven't a clue about.

You write "All other comparisons were done with either screenshots of the 'a' prop or comparisons to the Aztec head used on my Mk1 sonics. According to you, the 'a' prop used an Aztec head, it means my comparisons were inadvertently correct which does not render them invalid but actually lends weight to them. Nice one ********, thanks for that". 

Once again, I have never seen any evidence to show that you're mk1 Tennant resembles the Aztec head.  Your eyes? How about doing a nice overlay? Look and you shall find, you moron. If you cannot see a pristine Aztec head, you're a bigger moron than I thought.

You're now claiming that your mk1 Tennant sonic uses the cad files from an Aztec sonic.

But this is in direct conflict with everything you've previously said about this prop.

You've always claimed that your Eccleston sonics, and the Tennant mk1 sonic that you extrapolated from your Eccleston replica, were made from your references of "the Penny Howarth made hero prop", and specifically not the Aztec prop. ""It was extrapolated from the idealised S1-2" 

The Celestial Toystore: Ok, I'm going to take this slow..... 

" As I have stated on record, this was derived from my Season 1-2 sonic from which I had extrapolated from".The Celestial Toystore: The Ultimate Edition 10th Doctor Sonic Screwdriver

"I had not had access to the Tennant prop. I have never claimed it was 100% perfect and never claimed anything other than it was extrapolated from my near 100% accurate Eccleston sonic." The Celestial Toystore: Omygod they killed Kenney (you bastards!)

"Just to make sure that the moron Phez is 100% clear on this point, I have never claimed access to the Tennant prop just the Season 1 prop. My replica has been extrapolated from the Season 1 prop" The Celestial Toystore: The turd that won't flush

"Little is really known about the Aztec and there has been a lot of myth that surrounds the original Season 1 prop. I had the pleasure of measuring one of the Season 1 props: the 'wide slider' version that featured the 0.25mm step below the struts but this version, although able to extend, was not really considered a 'hero' prop as such as it was quite battered and had to be held in such a way as to hide the 8mm wide slot in the body". The Celestial Toystore: Secrets of the Aztec

You have consistently claimed for the past few years that you had access to the wide slider prop, not the Aztec prop. But now you seem to be changing your tune. 

Mostly all of your defenses from this point relies on your claim to have used the Aztec cad files for your Tennant mk1 sonic, so I'll forgo further dissection of those points. And this is 100% true. But it does not mean that I have to admit certain things in the public domain. Yes, the wide slider prop was the main reference source but certain extra things were referred to. It's like the whole issue of prop access. I have had, do and may still, have access to certain things I am not supposed to. But just because I am coy about it, doesn't mean it doesn't happen. I just don't say because it compromises my sources of access. I share my info with certain people because I like them and they can be trusted. They are not pricks like you. You can call me out on it but fuck you, I don't give a fuck because those that matter know what the truth is and they know I am telling it. You, however, are a weaselly little fuck with an attitude problem and an overactive sense of entitlement. I put in clues in what i say because I like creating puzzles. So piss off. 

You state that the emitter on the MFX was cast metal because it "corrodes easier than the rest of the sonic and appears to rust in places, which suggests a casting alloy". First of all, I've never seen anyone's MFX sonic with rust on it. Rust is the result of Iron oxidation and the MFX head has no iron in it. (Use a magnet to test this if you don't believe me) There may be aluminum oxide on the emitter head, aluminum does oxidize, but it's not rust. But, beyond that aside, you're missing the more obvious answer to your theory of different alloys, which is that oxidation occurs more rapidly on a piece of metal with a dull finish than it does with a machine polished finished. The emitter heads became dull during the deburring process. The rest of the aluminum parts were not deburred in this way so they retained a higher shine. As time when on the dull parts oxidized quicker. Go take a piece of aluminum. Put a nice freshly machined shine on one part. Now take some scotchbright to another part of that same piece of aluminum and remove the tool marks, but in the process rough up the surface. Now watch which part oxidizes first. Don't be patronising. I have been doing this a lot longer than you have, you fucking cretin. I do this for a living, you're a fucking amateur in every sense of the word. I know at least one MFX owner that has a head that has minute spots of rust like dirt. Personally, that is the only one I have seen. What I am suggesting is a degree of oxidation that is not consistent with machined aluminium, rumbled or not. It is consistent with a pouring alloy. You've got an answer for one thing, how about answering why the head is not perfectly circular? I maintain that it was likely the head was cast off a machined die.

Eventually in your response, when you run out of reasonable answers to my objections you just turn to insults and off hand dismissals without answers "You have no interest in finding out what is correct, you're just hell bent on making it look like I'm wrong. I don't give a **** as I've seen the prop, you haven't, so **** off you loser and go CAD up some more proof to support your dogma" 

What dogma am I trying to prove? I have no interest in the MFX sonic. I have no association with the people who ran or worked for MFX. I didn't put any stock in them, and even if I did they're all sold and gone now. You are trying to prove I am wrong. You lack basic fucking respect. You lack the intelligence, the insight and the sheer class to learn when to shut the fuck up and see the bigger picture. You have NO idea what is going on here. You can barely see straight let alone comprehend the more subtle facts of what I do and how I do it because you don't want to as the  reality will probably drive you sick with envy. So instead of taking the time to engage brain, you put your fingers in your ears and go 'lalalalalala' because the possibility of me being right sickens you. 

Furthermore, with this post "I used the Perfetto brand because it was easily available. It is IDENTICAL to Aleenes. It is the exact same stuff, molecule for molecule you retarded ****. Do I use it? Maybe I do, maybe I don't. But I will say something, those of you out there who know the truth are secretly pissing themselves over how big a fool you have made yourself look with this last bit. I'll save that for another day. ;-)" makes me wonder if you've ever actually gotten a hold of any Aleene's crackle because if you did, you'd know that the consistency, application process, and appearance of the two products couldn't be more different. You are such a fucking douche. I'll do another tutorial shall I using both products? They are identical in every way you fucking idiot. If you don't see that, then you are cack handed loser. Ask Aleenes, ask Perfetto. They use the same fucking supplier you dumbass fucktard.

Oh, and there is one other point that you did not answer. Which is that you lie, that you posted lies about me and insulted me before I had ever said two words to or about you.

You assert "This project was something you had discussed and had talked to Russ about. I know this for a fact" 

PROVE THIS OR APOLOGIZE FOR BEING A LIAR.

I know for a fact that you cannot support this assertions in any way because I know for a fact that they are 100% untrue.

You write "you had a project and the intent to do so and you had made arrangements to make it happen" This is a complete fabrication and you cannot possibly have any support for your claims because they never happened. You just made it up and lied about it. Now you're caught and you think you can worm your way out by persisting in your lie and you think if you just keep saying it over and over it will become true. But I'm sorry, that's not how lies work. I don't need to. You proved it for me, you dickhead. Your statement about me trying to 'discredit your project' is enough proof all by itself.  I'm not retracting it. WHAT THE FUCK ARE YOU GOING TO DO ABOUT IT???? CUNT.

You tell your fans "I may be an *******, but I'm an honest one". But in your blog about me you didn't address how you saw someone else making a NS sonic screwdriver replica and decided to post lies about that person on your blog in order to discredit the project with ABSOLUTELY no basis for your assertions. Nope, I didn't discredit you. You pretty much discredited yourself. You want to make a sonic? Go ahead. I'm not stopping you. Won't stop me taking the piss out of you though. Why? Because you're a complete clown and I cannot stand you.

You say "I've never wanted enemies but some idiots just hate me for no reason. So I give them a reason". That's exactly how I felt when you started making up **** about me and insulting me, when I had NEVER ONCE SAID A SINGLE THING ABOUT YOU. No, not directly. But oblique dismissals of my work, a total lack of respect every time anyone ever mentioned me or my products, your tunnel vision evey time anyone brought up something of mine that conflicted with your narrow world view....that pretty sums up the level of respect you show me. So because of that, I don't see why I have to be nice to you. Is that clear enough for you or do I have to post a huge picture of someone flipping you the bird?

You say that "The last vestiges of respect I had for Stokes has vanished"

Well I the last vestige of respect I had for you vanished when you started posting lies about me before you even knew who I was. When you see someone make up lies about you, and tell other people these lies, you start to question what else they have lied about in the past. That's why I think your blog is full or ****. That is why I don't take any claim you make at face value. Because I know for a fact that you are a liar. At this point I really don't give a flying fuck anymore. Whatever i say, you'll just argue against, so what's the point? You're coming out of this looking like a twat. Me? I couldn't care less. You make your bed, you lie in it. I call it like I see it. I have to admit, your vehement denial made me question what I was told by the guy who tipped me off to this. I was almost willing to think you may be on the level but as soon as you said I was discrediting your project and not you, that pretty much confirmed it. Don't be sore about it, shit happens.